Applying grout is a simple task

September 1, 2016

Most people needs a professional and feel that applying grout to a tile is a procedure that is boring. But a little knowledge and a secure hand is all which is required that you get this job done all on your own.

To do this endeavor, take water in a pail. The quantity will be dependent on the space that you need to cover. Check the instructions manual of the grout which you have bought to get a right idea on the quantity you will demand for the space you have. Always have latex or rubber gloves on your own hands to protect them while doing the occupation.

Till you have the necessary amount of grout prepared combine the grout powder with the water. If you have small grout joints to fill in then let the grout mixture have even more thicker than that or a rough consistency, much like crunchy peanut butter. Grout which is the consistency of cake dough or softer will be needed by bigger grout spaces. You will have to prepare the space, before you apply the grout. It must be free of any debris and dust. You’ll need a grout trowel with this occupation. You will need to begin applying the grout around the tile all at an angle of 30 degrees. Once you have filled all the joints, you’ll need to do the same again in the opposite way.

Once done, you’ll desire scatter dry grout. Make sure the temperature in the room is kept equally. Much of heating or cooling can result in discoloration. After set, remove and seal the grout.

No Comments

Comments are closed.